SFA Link
 
 
Isolated Analog Switch Select Bar  
   
CPC7524: Quad High Voltage, High Frequency Isolated Analog Switch Array
(Top)
 
CPC7524 Image CPC7524 Block Diagram  
  CPC7524 Block Diagram  

APPLICATIONS:

  • Instrumentation
  • Automatic Test Equipment (ATE)
  • Industrial Controls & Monitoring
  • Worldwide AC Mains Monitor
  • Battery Monitoring & Charging

FEATURES:

  • Swith Voltage up to 600V
  • 110dB Switch=to-Switch Isolation at 5kHz
  • Flexible Switch Configuration
  • Smart Logic for Power-Up/Hot-Plug State Control
  • Flexible Switch Configurations
  • 3.3V Operation with Very Low Power Consumption
  • Switch Current Limiting and Thermal Shutdown Protect Against Fault Conditions
  • TTL Logic-Level Inputs
  • Input Latch
  • Matched RON
  • Clean, Bounce-Free Switching
  • Monolithic IC Reliability
 
   

CPC7524 (Rev 2) Data Sheet

The CPC7524 Quad High Voltage (HV) isolated Analog Switch Array: The CPC7524 Quad High Voltage (HV) isolated Analog Switch Array builds upon our high voltage design and fabrication expertise for offline and telecom applications. This monolithic solid state device provides the switching functionality of four normally open (1-Form-A) relays in one small economical package.

Designed to provide flexible single-ended or differential access to high voltage networks, the CPC7524 high voltage array is configured as two sets of matched paired switches for improved differential performance. Additionally, sensitive differential applications will benefit from the matched pairs’ excellent pair-to-pair isolation. The self-biasing switches do not require external high-voltage supplies for proper operation.

Independent switch current limiting and switch-pair thermal shutdown features provide enhanced protection for devices connected to high voltage networks up to +600V.

 

CPC7512: Dual 1-Form-A High Voltage, High Frequency Isolated Analog Switch
(Top)

 
CPC7512 Device CPC7512 Block Diagram  
  CPC7512 Block Diagram  

APPLICATIONS:

  • Instrumentation
  • Automatic Test Equipment (ATE)
  • Industrial Controls & Monitoring
  • Multiplexed Ultrasonic Transducer Switching
  • Battery Monitoring & Charging

FEATURES:

  • Guaranteed Break-Before-Make
  • Low, Matched On-Resistance
  • Switch Voltage up to ±320V
  • 60dB Off Isolation at 1MHz
  • Flexible Switch Configurations
  • Smart Logic for Power-Up/Hot-Plug State Control
  • 5V Operation with Very Low Power Consumption
  • Thermal Shutdown Protects Against Fault Conditions
  • TTL Logic-Level Inputs
  • Input Latch
  • Clean, Bounce-Free Switching
  • Monolithic IC Reliability
 
   

CPC7512 (Rev 1) Data Sheet

The CPC7512 Dual 1-Form-A High Voltage, High Frequency isolated Analog Switch: The CPC7512 dual 1-Form-A high voltage, high frequency, isolated analog switch builds upon IXYS Integrated Circuits Division's design and fabrication expertise for industrial applications. This monolithic solid state device provides the switching functionality of two normally open (1-Form-A) solid state relays for high frequency applications in one small economical package. Both switches incorporate a compensation method to minimize open-state capacitance for improved off-isolation over frequency.

Designed to provide flexible single-ended or differential access to high voltage networks, the CPC7512 is configured as two independent switches with optimized state control. The self-biasing switches do not require external high-voltage supplies for proper operation.

An integrated thermal shutdown feature provides not only enhanced protection for devices connected to high voltage networks up to +320V, but also an external signal to indicate the device is shut down.

 
CPC7514: Quad High Voltage Isolated Analog Switch Array (Top)  
CPC7514Z Picture CPC7514 Block Diagram  
CPC7514 Block Diagram  

APPLICATIONS:

  • Instrumentation
  • Automatic Test Equipment (ATE)
  • Industrial Controls/Monitoring
  • VoIP Gateways
  • Digital Loop Carriers (DLC)
  • Battery Monitoring/Charging
  • PBX Systems
  • Optical Terminals (ONT, ONU)
  • Hybrid Fiber Coax (HFC)

FEATURES:

  • Low, Matched Ron
  • Switch Voltage up to ±320V
  • 110dB Switch-to-Switch Isolation at 5kHz
  • Flexible Switch Configurations
  • Smart Logic for Power-Up/Hot-Plug State Control
  • 3.3V Operation with Very Low Power Consumption
  • Current Limiting & Thermal Shutdown Protect Against Fault Conditions
  • TTL Logic-Level Inputs
  • Input Latch
 
   

CPC7514 (Rev 6) Data Sheet

The CPC7514 Quad High Voltage (HV) isolated Analog Switch Array builds upon IXYS Integrated Circuits Division's Line Card Access Switch (LCAS) design and fabrication expertise for telecom and non-telecom applications. This monolithic solid state device provides the switching functionality of four normally open (1-Form-A) relays in one small economical package.

Designed to provide flexible single-ended or differential access to high voltage networks, the CPC7514 High Voltage Array (HVA) is configured as
two sets of matched, paired switches for improved differential performance. Additionally, sensitive differential applications will benefit from the matched pairs’ excellent pair-to-pair isolation. The self-biasing switches do not require external high-voltage supplies for proper operation.

Independent switch current limiting and switch-pair thermal shutdown features provide enhanced protection for devices connected to high voltage networks up to ±320V.

 
   
Click here for Reliability Reports for these devices
 
Sales Partner Login Sales Partner Login Link to IXYS Clare Partner Login - Password Required PARTNER LOGIN: PASSWORD REQUIRED